Smart Gas Valve Control

Replaces: SV9501M2080
Gas Type: Natural Gas
Fuel Type: Natural Gas
Body Pattern: Straight-Through
Voltage: 24v
Ignition Trial Time: 90 sec
Inlet Size: 3/4″
Outlet Size: 3/4″
Ignition Type: Intermittent Hot Surface Pilot
Ignition Trials to Lockout: Continuous Retry

Categories: ,


Description for Honeywell SV9601M4571

Product Overview:

The SV9601 SmartValve System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. This product family offers several different intermittent pilot sequences for a wide range of applications. This system is suitable for application in a wide range of gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, space heaters, water heaters, decorative appliances, and commercial cooking units. The specific application of the SmartValve System is the responsibility of the appliance manufacturer.

Product Specifications:
Description: 3/4 in. NPT x 3/4 in. NPT Intermittent Hot Surface Pilot Ignition SmartValve Control with standard opening and 3.5 in. wc pressure regulator setting
Flame Sense: Two Rod
Type of Gas: Natural
Ignition System Type: Intermittent Hot Surface Pilot Ignition
Ignition Sequence: Intermittent Pilot
Ignition Source: Pilot
Ignition Trials To Lockout: continuous retry
Body Pattern: Straight-through
Opening Characteristics: Standard Opening
Control Voltage (Thermostat or other call for heat): 24 Vac, 60 Hz.
Ignition Trial Time (sec): 90 sec
Electrical Ratings: 24 Vac
Frequency: 60 Hz; 50 Hz
Flame Failure Response Time (sec): 1.6 sec @ 3 µA
Ambient Temperature Range (F): -40 F to +175 F
Ambient Temperature Range (C): -40 C to +79 C
Dimensions (in.): 3.2 in. wide x 4.9 in. high x 4.1 in.long
Dimensions (mm): 81 mm wide x124 mm high x 104 mm long
Pressure Regulator Setting (psi): 3.5 in. wc
Pressure Regulator Setting (kPa): 0.87 kPa
Pressure Ratings (psi): 1/2 psi
Pressure Ratings (kPa): 3.5 kPa
Inlet/Outlet Size (in.): 3/4 in. NPT x 3/4 in. NPT.
Maximum Capacity (ft³/hr): 415 ft³/hr
Maximum Capacity (m³/hr): 11.8 m³/hr
Minimum Capacity (ft³/hr): 30 ft³/hr
Minimum Capacity (m³/hr): 0.8 m³/hr
Maximum Capacity at 1 in. P.D. (ft³/hr): 300 ft³/hr
Maximum Capacity at 1 in. P.D. (m³/hr): 8.5 m³/hr
Pressure Tapping: 1/8 in. – NPT
Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
Includes: Two 3/4 in. x 1/2 in. reducer bushings and an LP conversion kit